Installation Instructions

To install Drift Base onto Dash

  1. Clean install area.

  2. Remove double sided tape cover.

  3. Place & Push the Drift Base onto dash with bering facing toward your windshield.

To Attach Hot Wheel Tab to a Hot Wheel

  1. Make sure underside of Hot Wheel is clean.

  2. Remove double sided tape cover.

  3. Alling the side of the tab with the nub on it with the front wheels on the Hot Wheel.

  4. Press the Hot Wheel Tab onto the Hot Wheel firmly.

To Attach Hot Wheel Tab to Drift Base

  1. Alling the nub on the Hot Wheel Tab with the bering.

  2. Push the Hot Wheel tab straight into the Hot Wheel.

  3. You may have to push hard for the Hot Wheel Tab to go into the bering.

  4. Make sure to push the Hot Wheel Tab in straight as for doing otherwise may damage the Hot Wheel Tab or the Drift Base.

To Remove Hot Wheel Tab from Drift Base

  1. I do not recommend removing the Hot Wheel Tab from the Drift Base as this can damage the Hot Wheel Tab or the Drift Base. Move forward with your own risk.

  2. If a Hot Wheel is on the Hot Wheel Tab than grip the Hot Wheel by its 2 front Wheels and pull straight away from the Drift Base.

  3. If pulling doesn't work try pulling and slightly wiggling the Hot Wheel back and forth till free.